Contact Us

         

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

Blog

Filtering by Tag: DIY

MagVent was Smooth and Easy...

Kevin Kelley

"To make some improvements to our backyard so that our dryer didn't vent right onto the outdoor patio, we wanted to move our dryer vent discharge from the back of the house to the side of the house. The old route had an old inefficient outdoor dryer vent hood with non-functioning flapper on the back of the house, and due to the typical connection and access issues had to use the flimsy snaking foil duct to connect the dryer inside the house and push it back into place.

Read More

MagVent Worked Like a Dream...

Kevin Kelley

"My washer & dryer are in a closet in a half bath. It is a tight spot. A few weeks ago the washer stopped spinning and a new set was purchased. I asked the installers to please be sure the dryer vent was hooked up when they finished. They said it was, it was not. So for the next week I had steam & condensation running down the bathroom mirror anytime I dried a load of clothes.....UGH! They new dryer vent wasn't lined up right, so I went to the hardware store and bought new flex pipe, clamps and a 90 pipe. I pulled the new dryer out and assessed the situation. I sat there on the floor for awhile, upset at my predicament, and remembered seeing an ad on Facebook for Magvent.

Read More

Happy Customer Thankful for MagVent

Kevin Kelley

"Nothing annoyed me more than having to reconnect my dryer after cleaning the vent. Clamps on both the dryer connection and the wall were a huge hassle, taking multiple tries; one or both of them would always come loose no matter how tight I tried to screw them on. I saw MagVent online and looked at the video. I was skeptical but decided I had to try it. MagVent was well worth the small investment! It worked! I even have a slight offset to deal with. I also decided not to cut the vent pipe; instead I added a "collar" around the opening. Worked great and I was in such disbelief about how easy this worked that I kept reconnecting it just to be sure. Awesome product! Thank you!"
-Edward S.

Read More

Another Happy MagVent Customer

Kevin Kelley

"I ordered MagVent MV-90 due to the very limited space behind my dryer. The space is so small, I have to pull the washing machine out in order to gain access to the back of the dryer. This is a true headache. I installed my new dryer a year ago, and it took hours to attach one simple bracket to the back of the dryer. I still had to worry about any movement of the dryer that could dislodge the vent from the back of the dryer. I happen to run across MagVent, and I knew installing the vent to the back of the dryer would be very simple. I would never have to worry about the vent dislodging again. You should clean your dryer vent regularly, especially myself since I have 3 teens and wash a lot of laundry. I found the installation to be simple. I look forward to just pulling the dryer out during servicing of the dryer vent without the worries." 

-Larry B.

Read More

"Great use of science!"

Kevin Kelley

"Great use of science! Even though I have a large laundry room, I have to pull the dryer out 3’ to get behind and hook up the vent. Then I had to climb over the dryer. With MagVent there's no more climbing! And the dryer is inches away from the back wall. (The reason it’s hard to see the installation in the “after” picture.)"

-William M.

Read More

I Tell Everyone About MagVent...

Kevin Kelley

“I've moved, re-moved, and finally stacked my stupid dryer sooo many times over the years. Thankfully my vent hole was measured exactly, and lines up well - but still needed a somewhat "unconventional" multi-layered vent run, baled together with some electrical wire, to be able to push it in straight without crushing the metal.”

Read More

Compelled by MagVent...

Kevin Kelley

"Compelled to say, after installing a new dryer using your venting solution - VERY happy with your product (and the lovely person that I spoke to on the telephone). Massive improvement over my previous mess of venting - nice short straight shot outside! Thank you for your inventiveness."

-Rand R.

Read More