"My dryer is so much easier to pull out for cleaning and servicing!"

“I just finished installing my MV-90. The installation was simple. My dryer is so much easier to pull out for cleaning and servicing. My vent goes through the floor into the crawl space  Prior to installing the MV-90, a large loop of flexible duct was left in the crawl space to allow the required slack for pulling the dryer out. In addition the making it a pain to pull the dryer out, this slack reduced airflow.

With the MV-90 installed, there is no need for slack in the crawl space, so airflow is not restricted and it is super simple to pull the dryer out. After pulling it out about a foot. The dryer automatically detaches itself from the ducting. re-installation of the dryer is just as simple. Push the dryer in, and the magnets align the duct and it attaches.”

-John G.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"I stumbled across the MagVent MV-90 and knew I had to have one!"

“Last year, while browsing the internet for a dryer vent to install in my new home that met my quality standards, I stumbled across the MagVent MV-90 and knew I had to have one.  Installation was a snap and I'm glad I'm not gonna have to fight that flexible hose as I push the dryer back into place.  I've attached before and after pics of my unique installation.  Thanks for the quality product - I haven't put it into service yet but I'm looking forward to that this weekend!”

-Randy G.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"The greatest thing ever for hooking up a dryer vent!"

“A friend showed me the MagVent and I thought it was the greatest thing ever for hooking up a dryer vent. I’ve always complained about how awkward it is to hook up the vent in our laundry cabinet. When he showed me the MagVent I knew that was the answer to my problem. My dryer broke down and when I went to repair it I purchased the MagVent along with the other parts to make my repairs. I purchased a couple 90 degree elbows and a section of extendable metal vent pipe. I mounted one section of MagVent to the wall outlet and the other parts to the dryer. It has worked great the couple times I’ve had to pull out the dryer. I’m very glad my friend showed me the MagVent. Thanks for such a great product!”

-John M.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"Thank you MagVent!"

BEFORE

AFTER

“I used to have to hop on top of the dryer and slide over into a tiny crevice trying not disturb any of my vent connections. I would have sweat through my jeans by the time the work was done. Now I feel like I can pull it back anytime to clean the vents out or for any other maintenance. Thank you MagVent!”

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

" I highly recommend this vent hook up!"

A great example of a dryer dragon!

“The MagVent allows us to move our dryer from 9 ½ inches out from the wall to just 3 ¼ inches.  We gained 6 ¼ inches of room in the hallway.  It made a huge difference!!  The MagVent came with easy to install instructions.  I highly recommend this vent hook up. Thank you MagVent!!”

Stephanie A.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"Thanks for making a great product!"

In general, I’m happy with the unit and wanted to let you know that the supplied components all seemed of high quality.  My installation took about 1.5 hours but part of that was adjustments that I needed to make to the existing vent protrusion from the wall.  That took me the most time, trying to get that right.  After that was completed, the attachment of the support ring and the magnetic dock were pretty straight forward.  I had a couple of issues that I needed to address to make it work.

1 - Because my existing vent curved immediately as it went into the wall, the magnetic ring would not seat all the way against the  drywall.  This was a simple fix as I just trimmed about 1/2 of metal off the ring using tin snips.  Simple fix that worked as needed.

2 - The magnetic dock had issues securing to the drywall ring.  This was due to the ring bending slightly outward because the metal tabs of the existing ductwork couldn’t be pushed perfectly flat or removed entirely.  Again, a simple fix.  I simply pushed the ring clips inward slightly.  This allowed the magnetic dock to securely clip into place.

The only other issue I ran into was trying to get the magnetic vent piece to connect flush to the dock.  I had about 1 inch of offset vertically between the vent and the dock and needed to work the vent piece to be in approximately square and vertical alignment before pushing the dryer into position.  This took me several attempts to get it lined up right but once I did, the vent docked correctly and completely.  

All in all, I feel much better about the vent and the fact that it replaced a plastic unit that was susceptible to fire and tears in the plastic that would release lint out the back of the dryer.  It also feels better to not have to try to get behind the dryer to have to connect the vent.  That was always a pain trying to get back there.  

I did watch a couple of your videos to help with the installation.  Those were beneficial.  

Thanks for making a great product!

Sincerely,

Phillip H.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

“I have been in the laundry industry for 13 years and never has a new product made dryer installation so easy!"

Another satisfied MagVent customer!

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"After we had our MagVent installed in our house, our clothes dried noticeably faster!"

Another satisfied MagVent customer!

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"Like watching the space shuttle dock in space!"

“When we remodeled our laundry room we had to work with a very confined space for our washer and dryer. I knew there was no room for a standard dryer vent hose so, since I am an engineer, I began to think about what I might fabricate to easily couple the dryer with the vent. Fortunately, I discovered MagVent before I went to the trouble of building a custom made adapter. With the MV-90 I was able to slide my dyer into its very tight space and watch the MagVent magnetically couple with the vent outlet. Really cool! My wife said it was like watching the space shuttle dock in space.

Great product!”

— Bill H. Satisfied Customer

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"I love this!"

“This was so easy to install and and all I have to do is slide my dryer back to install I love this!”

 -Clifton R.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"Quick and easy install!"

BEFORE

AFTER

“Quick and easy install!  No cussing from the hubby as he slid the dryer in place!” 

-Ellen M.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"I could not have completed this project without MagVent!"

Before

“My wife decided she wanted a cabinet and counter top surrounding our dryer.  I knew this install would be tough, but I didn’t realize it was going to be impossible to get it in there without completely crushing the vent.  I googled a lot before I found MagVent.  I could not have completed this project without MagVent!

-Jeremy B.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"This is a great device, especially for a stacked unit!"

"This is a great device, especially for a stacked unit. Pulling the washer/dryer out is a heavy, difficult chore, but disconnecting the dryer vent is a breeze with the MagVent!"

-James K.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"Great product!"

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

“We had to guide it a little due to the difference in height but after some minor adjustments we had success. Great product!”

-Jack B.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"As a do-it-yourself gal, this was by far one of the easiest installs I've ever done!''

“As a do-it-yourself gal, this was by far one of the easiest installs I've ever done.  It took longer for me to pull the dryer out and push it back in than it did to actually install the MagVent.  Nice tight seal, easy to connect the dryer side to the vent side.  So happy with my purchase, telling all friends/family about this product!

-Jamie F.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"This product is absolutely brilliant!"

BEFORE

AFTER

“This product is absolutely brilliant. My dryer sits in a very tight space and I could not hard pipe the dryer exhaust vent due to the tight quarters. Then I saw this product and it worked great! My house is safer and a lot easier to clean the dryer exhaust now due to it. I wish I knew of Magvent a few years ago; it would have saved me a lot of time and headaches!”

-Greg B.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"By far one of the easiest projects I’ve done!"

Good Afternoon,
I have finally been able to install my MagVent and let me say it was by far one of the easiest projects I’ve ever done. It was so easy to install and connected on the first try. It was a little over two inches off but it was able to set itself right and I have had no issues. I was very limited with space and it helped give me a couple extra inches closer to the wall. Great product and very happy with the installation and directions to install.
Thank You,
Ryan T.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"I applaud the engineering that went into this design. Bravo!"

I received my MV-90 today.  When I got home from work, I installed it.  My story is probably very familiar to you:

• We have a small laundry room, especially after we added a vertical storage cabinet to the right of the washer/dryer, which completely walled-in the dryer and the washer into a 60" space with wall cabinets above.

• We have a set of LG front-load units on pedestals.  We are expecting a new set to arrive on Saturday. So I wanted to improve the venting solution.

• Our house is set up for a dryer on the left; unfortunately the LG washer door is not reversible, so my wife wanted the washer to the left of the dryer to avoid door conflicts. 

• So that meant I had to run a vent from behind the washer to the right about 2.5 ft.  

• Last time I rebuilt the vent, I used the flexible, semi-rigid dryer vent , the kind that's fairly sturdy and not cheap. (This was not the vinyl fire hazard vent.)

• The problem was, whenever we pulled the dryer out, we almost had to remove the washer from the laundry room to hook-up the dryer vent again.  There was just no room to get back there without leaving a lot of extra vent (and I am neither skinny nor flexible anymore either).

• Of course that made it very difficult to clean and eventually the vent got partially crushed at the elbow into the wall.  

• Luckily our dryer vent-run to the outside outlet is only 18" from the laundry wall penetration, so it still worked fairly well.

• But when I took it apart to get ready for the new washer/dryer, last weekend,  I could not believe how much lint was stuck in the flex-vent duct.

I found your product while surfing the web looking for a better solution.  When I saw your product, I knew it was the right solution for me.  I applaud the engineering that went into this design. Bravo!

I just installed and test-fitted it to my old dryer.  There is no guarantee the new vent is in exactly the same place, but I took photos of an LG dryer similar to our new one at the store and it has to be close.  LG does not seem to have made any changes to the back of this class of dryer in the ten years since our last new one.

Parts for my new vent set-up:

1. One Whirlpool-brand, close-fit 90-degree 4-inch elbow from Amazon

2. One 2-foot x 4-inch aluminum rigid dryer vent and a couple of vent clamps from Home Depot

3. One short male-male 4-inch connector to give me the couple of extra inches I needed to put the MagVent into position

4. One 6" salmon cedar plank screwed to the wall to make it easier to position the MagVent bracket

5. I had the Nashua foil tape already.

I dry-fitted everything tonight and made sure my measurements were correct.  I then taped it all together, put vent clamps at all the unions and screwed it to the wall.  Perfect fit.

All in all, I am so happy with the results.  I don't think we will have the leaks that sent dryer lint to every corner of the room now that everything is rigid vent duct.  And I am expecting to be able to pull the dryer in and out without a headache every time.

(Oh - in case you are curious, the electric gizmos on my washer faucets are part of a FloodStop system.  It can detect water on the floor behind the washer and automatically shut off the water supply using those solenoid valves.  It is powered both with AC as well as a battery backup and works great.)

Thanks for my MagVent!

-Keith C.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"Amazing invention! Thanks so much!"

Just received the MagVent an hour ago;  attached are pictures of the installation.  It only took about 20 minutes, an amazing invention. Thanks so much can’t really be any simpler.  

-Kyle R.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/

"A great product, easy to install!"

“A month ago the "Check Vent" warning light on the dryer lit up.  I have a stacked washer/dryer in a narrow closet, and wasn't eager to pull them out to clean the vent.

But I did, and it's a good thing.  Here are two pictures of the lint I cleaned out of the vent:

I hadn't found MagVent at that time, so I reinstalled the old vent and pushed the washer/dryer back into the closet, expecting that the lint problem would recur.  A look at the old vent shows why:

With that many twists and turns in the vent, it's a "made-to-order" lint catcher.

Then I found MagVent online and ordered it.

Installation was easy, except for having to pull the washer/dryer out of the closet again.  Here are the two pieces, attached to the wall and to the vent on the back of the dryer:

Then I pushed the appliances back into the closet.  Here's the view behind the dryer afterwards:

I had tied a string around the flexible piece of the vent and taped it to the top of my dryer so the vent wouldn't sag as I pushed the dryer back into the closet.

I expect better air flow, which should keep lint from getting trapped!

Another benefit:  as can be seen from the before and after pictures below, the washer and dryer sit back into the closet!

Before:

AFTER!

A great product, easy to install.  It allows the dryer to sit back closer to the wall, and I expect that it will reduce the risk of lint build-up in the vent, which reduces the risk of fire!

Thank you!

Mark B.

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to decrease fire hazards, boost dryer efficiency, and save energy and space!

https://www.instagram.com/magventdryervent/

https://twitter.com/MagVentLLC

https://www.magvent-dryervent.com/

https://www.facebook.com/MagVentLLC/