203 North Cutler Street
Greeneville, TN, 37745
United States
8889607484
MagVent magnetically aligned dryer vent couplings help boost dryer efficiency and safety by making it easy to run a minimum path vent for your clothes dryer. Learn which model MagVent dryer vent coupling can help you with your dryer's venting arrangement.
"Compelled to say, after installing a new dryer using your venting solution - VERY happy with your product (and the lovely person that I spoke to on the telephone). Massive improvement over my previous mess of venting - nice short straight shot outside! Thank you for your inventiveness."
-Rand R.
Read MoreThis MagVent customer is excited about his new dryer vent connection.
Read MoreWill a MagVent coupling fit my dryer?
All MagVent couplings are designed to fit the standard 4 inch dryer vent. Which model you need for your installation needs depends on how far your dryer vent is from your exit vent when measuring from center to center of the vents.
Which MagVent coupling is best for my installation needs?
We offer three different MagVent models to fit a variety of venting needs. The MagVent MV-180 is designed for when the dryer vent is aligned with the wall vent in a straight 180 degree line, and offset by not more than 3 inches when measuring from center to center of the vents. If the vent path takes a 90 degree turn up the wall or down through the floor, or if it is off to the side at least 9 inches, then you need the MagVent MV-90. When using the MV-180 or the MV-90, keep in mind that for every inch of offset in vent alignment it requires an extra inch of clearance behind the dryer to accommodate the slight bend in the self-aligning transition hose. If the exit vent is between 3 inches and 9 inches away from the dryer vent, then you need the MagVent MV-Flex. The MV-Flex is not a self-aligning model like the other two, but it does give you more leeway with your vent alignment. With the MV-Flex you provide your own length of hose and manually align the magnets. The MV-Flex allows you to use the shortest piece of hose possible to make the connection once your dryer is in place, eliminating the typical, extra long hose that gets crushed and obstructed behind the dryer.
If you would like help determining which MagVent model is right for your installation needs, you are welcome to send inquiries to info@magventllc.com. Please describe how your vents align and how far apart they are when measuring from center to center of the vents, or include photos of your vent alignment.
Read More"Excellent. This is such a perfect solution. Please tell everyone there that this is nearly the best invention since sliced bread. I hope you are working on selling MagVent products to all appliance stores. They need to know about them!"
-Cathy H.
Read More“The MagVent dryer vent is a terrific product that is ideal for making a dryer vent connection with limited space. The magnetic mount allows for a secure/tight connection and is super easy to install. I am super satisfied with this product and I highly recommend it.” Christopher H.
Read More“When we first purchased our home, the dryer was hooked up using a flimsy foil duct as you can see in the before photo. I saw an ad for MagVent online and ordered the MagVent MV-90 kit the next day. This is a much cleaner installation and will not trap lint like the foil duct had. The magnetic coupling is also helpful, especially with the tight closet where the washer and dryer are located. Thank you for a great product!” - Eric N.
Read More"The MagVent MV-90 was the perfect solution to a lifelong problem!"
-Raymond M.
Read More"I had the retailer install the new dryer I purchased. The first three pictures are what I ended up with. After finding your product, I installed the new MagVent MV-180. The last three pictures show the end result. My dryer is closer to the wall, and if I have to do any work behind the dryer, it makes it a lot easier.
I am so glad I found this product."
Van O.
Read More“I installed a MagVent MV-90 recently, and prefer it to the old machine-to-flex-pipe-to-wall method of venting a dryer. I can now push the two machines closer together and pull the dryer away from the wall without worrying about damaging the vent connection.” -Nick D.
Read More“When we moved into our new home, one of the tasks I dreaded the most was installing my dryer. I had seen a couple of YouTube videos, and was curious about MagVent. I mentioned my curiosity to my brother-in-law who immediately began to rave about the MagVent he had recently purchased. So I took the plunge.
The moment I opened the box I was holding the best built dryer vent I had ever held. It felt so sturdy. I looked at the space I had to work with at home, and immediately felt confident I could knock this out with my handy new sidekick. MagVent made installation a breeze. I have included pictures of the before and after. I walked away feeling like a pro. Thanks for this product. It made my life so easy.” -Scott T.
“Our dryer has a side vent and the distance between the dryer and the wall is only 7 inches, making conventional taping very difficult. The dryer door requires a firm closing and that sometimes caused the light weight dryer to move on the hard floor. Even slight movement would cause the dryer to disconnect from the vent. I decided to use MagVent and that solved the problem. Now even slight movement can be accommodated by the MagVent.” -Chuck R.
Read More"Hi, my name is Jeremy Armagost. I am happy to tell you my story.
I had just moved into a new place and attempted to hook up my dryer. The space was tight and I needed a fair amount of foil duct. As I slid the dryer into place, the foil coiled, creating crooks and bends. The dryer began to overheat and needed to be pulled out each time. There had to be a better way. Then, I stumbled upon MagVent! After watching the videos, the solution was simple. I had to have one. This is easily the best money spent. Every penny. Everything I needed arrived quickly. In my case, I was lucky and needed only a flat screwdriver to install. In no time, my dryer was back in place, running cool. Thanks MagVent!"
"Great product, just installed and took less than ten minutes. I just wish that I had invented it!"
-Wes D.
Read MoreAssembly Dimensions and Photo of the MagVent MV-Flex
Read More“MagVent has manufactured an extraordinary product. For a decade, with frustration I have had to periodically move our gas dryer in an extremely tight location. This required contortionist maneuvers for a poor outcome.
Read MoreAssembly Dimensions and photo of the MagVent MV-90
Read MoreAssembly Dimensions and Photo of the MagVent MV-180
Read MoreMagVent MV-180 Field Modification to Work with a Telescoping Close Offset
Read More“When we remodeled our laundry room we had to work with a very confined space for our washer and dryer. I knew there was no room for a standard dryer vent hose so, since I am an engineer, I began to think about what I might fabricate to easily couple the dryer with the vent. Fortunately, I discovered MagVent before I went to the trouble of building a custom made adapter. With the MV-90 I was able to slide my dyer into its very tight space and watch the MagVent magnetically couple with the vent outlet. Really cool! My wife said it was like watching the space shuttle dock in space.
Great product!”
Bill H.
Read More