"To make some improvements to our backyard so that our dryer didn't vent right onto the outdoor patio, we wanted to move our dryer vent discharge from the back of the house to the side of the house. The old route had an old inefficient outdoor dryer vent hood with non-functioning flapper on the back of the house, and due to the typical connection and access issues had to use the flimsy snaking foil duct to connect the dryer inside the house and push it back into place.
Read More
A MagVent Self-Aligning Magnetic Dryer Vent Coupling Can Help!
Read More
"My washer & dryer are in a closet in a half bath. It is a tight spot. A few weeks ago the washer stopped spinning and a new set was purchased. I asked the installers to please be sure the dryer vent was hooked up when they finished. They said it was, it was not. So for the next week I had steam & condensation running down the bathroom mirror anytime I dried a load of clothes.....UGH! They new dryer vent wasn't lined up right, so I went to the hardware store and bought new flex pipe, clamps and a 90 pipe. I pulled the new dryer out and assessed the situation. I sat there on the floor for awhile, upset at my predicament, and remembered seeing an ad on Facebook for Magvent.
Read More
"MagVent saved the day! After 3 weeks of running to the laundromat shuffling wet clothes around, I finally decided to give the Magvent MV-90 a try. I spent quite a few dollars prior, throughout the past few weeks, trying to fix the dryer vent. Now I am back in business!!" -Amanda
Read More
"Nothing annoyed me more than having to reconnect my dryer after cleaning the vent. Clamps on both the dryer connection and the wall were a huge hassle, taking multiple tries; one or both of them would always come loose no matter how tight I tried to screw them on. I saw MagVent online and looked at the video. I was skeptical but decided I had to try it. MagVent was well worth the small investment! It worked! I even have a slight offset to deal with. I also decided not to cut the vent pipe; instead I added a "collar" around the opening. Worked great and I was in such disbelief about how easy this worked that I kept reconnecting it just to be sure. Awesome product! Thank you!"
-Edward S.
Read More
Once I saw MagVent I knew this was a great product. Moving a dryer to clean behind it is usually extremely difficult if not impossible due to the vent hose…
Read More
A MagVent Self-Aligning Magnetic Dryer Vent Coupling Can Help!
Read More
"I ordered MagVent MV-90 due to the very limited space behind my dryer. The space is so small, I have to pull the washing machine out in order to gain access to the back of the dryer. This is a true headache. I installed my new dryer a year ago, and it took hours to attach one simple bracket to the back of the dryer. I still had to worry about any movement of the dryer that could dislodge the vent from the back of the dryer. I happen to run across MagVent, and I knew installing the vent to the back of the dryer would be very simple. I would never have to worry about the vent dislodging again. You should clean your dryer vent regularly, especially myself since I have 3 teens and wash a lot of laundry. I found the installation to be simple. I look forward to just pulling the dryer out during servicing of the dryer vent without the worries."
-Larry B.
Read More
"Thank you, MagVent for helping me install a washer and dryer into a closet! As you can see from the photos, installing with the standard venting would have been nearly impossible. Thank you for making installation a snap." -Kristi B.
Read More
“The kinked vent behind our newly installed compact stacked W/D was hidden from view, and only discovered when the dryer caught on fire…
Read More
"Excellent product! Very simple and effective design. I am 100% satisfied with it! This product lives up to the company's claims. I will recommend MagVent to anyone! Extremely simple installation. I don't see any way this product can be improved." -Mark B.
Read More
Replace your old, flammable dryer vent with a fire safe & energy efficient MagVent magnetic dryer vent coupling. Turn that dangerous mess of hose into a beautiful Valentine’s Day heart wreath to set your love’s heart on fire…instead of your laundry room!
Read More
“This is a great product! It saves the hassle of the long duct lines…”
Read More
"Excellent Product." -Dan W.
Read More
“My MagVent MV-180 Installation is completed, and works perfectly. It could not have been easier. The before and after pictures speak for themselves…
Read More
"I really am glad I chose MagVent. It was one of the best things we ever purchased. It's exactly what we wanted. It's very easy to disconnect and reconnect with a very good air tight seal. Thanks again!"
-Gary C.
Read More
“I just installed the MagVent MV-180, and it was pretty easy. I took my time, and cut away baseboard. It was well worth the money. I have replaced the vent so many times I can’t count…
Read More
"Great use of science! Even though I have a large laundry room, I have to pull the dryer out 3’ to get behind and hook up the vent. Then I had to climb over the dryer. With MagVent there's no more climbing! And the dryer is inches away from the back wall. (The reason it’s hard to see the installation in the “after” picture.)"
-William M.
Read More
“My wife and I bought a stackable washer and dryer, and converted a closet on the second story of our house into a laundry room. I racked my brain for a long time on how I was going to be able hook them up once in the closet with limited space….
Read More
“I've moved, re-moved, and finally stacked my stupid dryer sooo many times over the years. Thankfully my vent hole was measured exactly, and lines up well - but still needed a somewhat "unconventional" multi-layered vent run, baled together with some electrical wire, to be able to push it in straight without crushing the metal.”
Read More